Structure Of The Parameter Overviews - Baumuller b maXX BM3000 Operating Manual

4.2

Structure of the parameter overviews

Digital outputs
Configurable status word 1 ms
Oscilloscope function
Z109.1–
4.2 Structure of the parameter overviews
All parameter overviews are structured according to the following pattern:
Number Name
1.1 System clock
1.2 System ticks RT1
Number = Number of the parameter consisting of ID of the functional block (FB) and the
numbering within the FB
78 Parameter manual b maXX BM3000
Document no.: 5.12001.07
of 820
Remaining time
Adjustable from 62,5 µs to 100 s.
*) this means the cycle of the set value generation, the cycle of the monitorings,
the cycle of the management and the cycle of the other functions of the preset
operation mode Z109.1–.
Operation mode
-12 Coupled operation
-7 Autotuning
-6 Spindle positioning
-5 Synchronous operation with virtual master axis RT1
Synchronous operation with real master axis
-4 Position control with synchronous set of set-
points
-3 Speed control with ramp function generator
-2 Current control
-1 Notch position search
1 Target position setting
2 Speed setting 1 with ramp function generator
5 Manual drive operation
6 Reference run operation
Type Min
FLOAT 0
UDINT 0
Max Default Value Unit
1000000000 0
0xFFFFFFFF 0
Task
Fieldbus
Remaining time (manage-
ment)
RT1
RT0 (set value), RT1
(Management)
Fieldbus
RT1 (default setting) or
fieldbus
RT0
RT1
RT1
RT1 (default setting) or
fieldbus
RT1
RT1
Factor
sec 1:1 X
1:1 X
Baumüller Nürnberg GmbH