Description Of The Parameters - Baumuller b maXX BM3000 Operating Manual

4.8
Operating Modes

4.8.12.4 Description of the Parameters

166.1
Mode
The mode can only be changed if the controller is not enabled. 
15 ... 9
166.2
State
664 Parameter manual b maXX BM3000
Document no.: 5.12001.07
of 820
Bit no. Meaning
1 ... 0 Mode for U-f characteristic
0: Simple U-f characteristic without overcurrent protection
1: Simple U-f characteristic with overcurrent protection
2: Compensating controller for acceleration
2 Reserved
3 Current control for low speed
0: Inactive
1: Active
4 0: Increase of frequency via slip compensation
1: Compensating controller for frequency with speed controller
5 0: Ramp-up via S-curve
1: Ramp-up linear
6 0: Set value via
1: Set value via ramp function generator
7 Frequency reduction:
0: Inactive
1: Active
8 Current set value
0: Current threshold motor/generator
1: Current setting (Z133.22–)
Reserved
Bit no. Meaning
0 Acceleration
0: negative direction of revolution
1: positive direction of revolution
1 Braking
2 Set value reached
3 Reserved
4 Positive limit of acceleration
5 Negative limit of acceleration
Z166.6–
(Input reference frequency)
(Z166.3–
/ Z166.4–)
Baumüller Nürnberg GmbH