Voltage Test; Requirements For The Electrical Supply - Baumuller b maXX BM3000 Operating Manual

Parameter
Hide thumbs Also See for b maXX BM3000:
Table of Contents

Advertisement

DANGER!
Danger to life from electric current!
When this electrical unit is operated, certain parts of the unit are of necessity at a haz-
ardous voltage.
Therefore:
m Pay attention to the areas on the device that could be dangerous during the elec-
Figure 32:
3.2

Voltage test

DANGER!
Risk of fatal injury from electrical current!
During the routine test of these devices, a voltage test is performed by Baumüller
Nürnberg GmbH in accordance with EN 61800-5-1, Section 5.2.3.2. It is thus unnec-
essary for the customer to do this.
Therefore:
m Subsequent tests of the devices using high voltages may only be performed by
m Disconnect the converter from the system during high-voltage testing!
3.3

Requirements for the electrical supply

For all important data, see the Operating Manual for the b maXX 3300.
Small deviations in the electrical supply from the requirements can result in malfunctions
of the device. If the supply deviates greatly from the requirements, the device could be
destroyed.
trical installation.
Danger areas during electrical installation
Baumüller Nürnberg GmbH.
Commissioning BM3xxx
Parameter manual b maXX BM3000
Document no.: 5.12001.07
3
47
of 820

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B maxx bm2500

Table of Contents