The following motor parameters must be specified:
m Maximum speed,
mech.(Z107.26–
m Number of pole pairs
m Phase sequence
(Z107.38–
wise)
Now save the entered data.
25 Click on "Parameter set management" in the navigation
Figure 22:
ProDrive Navigation Dataset management
26 Click on the "Save all" button in the Dataset management.
Figure 23:
ProDrive: Dataset management
Commissioning BM25xx
Maximum speed, mechanical)
(Z107.19–
Pole pairs)
Motor flags, Bit 0 = 0: counter-clockwise, Bit 0 = 1: clock-
Parameter manual b maXX BM3000
Document no.: 5.12001.07
2
37
of 820