2.7
Performing the commissioning
2.7
Performing the commissioning
Begin the commissioning after you have completed the preparations.
1
2
3
4
Figure 8:
Acknowledging
5
warnings/errors
NOTE
Any queued error messages may result from the as yet incomplete parameter setting.
These errors cannot be acknowledged.
26
Parameter manual b maXX BM3000
Document no.: 5.12001.07
of 820
Connect the power supplies to the b maXX
(main power supply + control voltage).
The device then starts up.
Establish communication as described in
Start the ProDrive program (if it is not already running).
Then click on auf "Drive Manager" in ProDrive
ProDrive: Navigation Drive manager
"Acknowledge" any warnings/errors that may be present in the "Drive manager" win-
dow (press the "Reset errors" button several times if necessary).
®
ZPreparations–
on page 18.
Baumüller Nürnberg GmbH