Preparations - Baumuller b maXX BM3000 Operating Manual

3.4

Preparations

The device may only be operated in environments of the second type (industrial environ-
ment).
The destruction of the device can cause personal injury.
DANGER!
Danger to life from electric current!
If the requirements for the electrical supply are not complied with, the device may be
damaged/destroyed and consequently present a significant danger to persons.
Therefore:
m Before installation, make sure that the requirements for the electrical supply are
3.4 Preparations
Specimen installation of a BM3xxx axis unit with a Baumüller Motor DS 56-S motor
(SRS50 encoder, sine-cosine with Hiperface
The prerequisite for the commissioning is that assembly and installation have been car-
ried out correctly.
1
NOTE
Pictures for the next work steps can be found in the Operating Manual for the
b maXX
2
48 Parameter manual b maXX BM3000
Document no.: 5.12001.07
of 820
met.
Make sure that the assembly is carried out correctly and, in particular, that all safety
regulations have been observed (see Assembly in the Operating Manual for the
®
b maXX 3000 basic unit).
®
3000 basic unit and in the
Make sure that the installation is carried out correctly and, in particular, that all safety
regulations have been observed (see Installation in the Operating Manual for the
®
b maXX 3000 basic unit).
®
).
ZInstallation plan–
on page 49.
Baumüller Nürnberg GmbH