Configurable Status Word - Baumuller b maXX BM3000 Operating Manual

Description of the Software Modules and Parameters

4.4.21 Configurable status word

With this function single bit information with up to 16 parameters can be copied into a
common status word (Z165.2–).
The following settings are possible for each status bit ("channel")
Via the parameter
is specified (OR function).
NOTE!
The cycle time of function is 1 ms. States, which occur for a short time interval will not
be detected reliably by the configurable status word or the latch. The configurable
status word is generated at the end of task RT1. That means that all other operations
of this task have been processed.
Furthermore adjacent bit pairs of the parameter
erations. The structure of the operations is predefined (see
The following boolean operators are available: AND, OR, XOR, NAND, NOR and XNOR.
The operation results can also be mapped to the configurable bits 14 and 15 of the
Z108.3–
lay of 1 ms. This function is described in the parameters
m Parameter number of source
m Bit number
m Logical bit
Z165.6–
Status word 1 of the drive manager. Here the information is available with a de-
Latch the state of short-time bits of the parameter
Z165.2–
Parameter manual b maXX BM3000
Document no.: 5.12001.07
Z165.2–
can be combined with logic op-
ZFig.
121–).
Z108.9– to Z108.12–.
4
301
of 820