Setting In Local Stations - Mitsubishi Electric QJ71GF11-T2 User Manual

11.3.3

Setting in local stations

Connect GX Works2 to a local station and set parameters.
Master station (Station No.0)
1.
Create a project.
Create a project using the same method as when creating the master station's project. (
Section 11.3.2)
2.
Open the network parameter window and set parameters as follows.
Project window
Enter 1 or 2.
3.
Open the refresh parameter window and set parameters as follows.
Set the same refresh parameters for local stations (station number 1 and station number 2).
Project window
404
Setting
Local station (Station No.1)
[Parameter] [Network Parameter]
[Parameter] [Network Parameter]
button
Setting
Local station (Station No.2)
[Ethernet/CC IE/MELSECNET]
[Ethernet/CC IE/MELSECNET]
Page 402,