Mitsubishi Electric QJ71GF11-T2 User Manual page 301

(4) Program example
The following program is for reading the data sent from station No.0 by the SEND instruction, into channel 2 of
station No.2 (own station) to D770 to D773, when SB0031 is turned on.
For details on the SEND instruction, refer to the following.
Page 283, Section 10.8
(a) System configuration
Same as the SEND instruction program example.
(b) Devices used in the program
• Link special relay (SB)
Device
SB0031 RECV execution request flag (2)
Remark
For details on the link special relay (SB), refer to the following.
Page 473, Appendix 3
• Devices used by users
Device
M165 Completion device
M166 Completion status indication device
Description
Description
CHAPTER 10 DEDICATED INSTRUCTIONS
Device Description

Device Description
D370 to
Control data
D387
D770 to
Receive data storage device
D773
10
299