To Set In The Master Station - Mitsubishi Electric QJ71GF11-T2 User Manual

11.2.2
Setting in the master station
Connect GX Works2 to the master station and set parameters.
Master station (Station No.0)
1.
Create a project.
Select "QCPU (Q mode)" in "Series" and "Q10UDH" in "Type".
[Project]
2.
Open the network parameter window and set parameters as follows.
Project window
390
Setting
[New]
[Parameter] [Network Parameter]
Intelligent device station (Station No.1)
[Ethernet/CC IE/MELSECNET]