Error Invalid Station And Temporary Error Invalid Station Setting Function - Mitsubishi Electric QJ71GF11-T2 User Manual

8.5
Error Invalid Station and Temporary Error Invalid Station
Setting Function
When a slave station is set as an error invalid station, even if it is disconnected from the network during data link, the
master station will not detect it as faulty station.
Furthermore, by the temporary error invalid station setting function, a slave station can be temporarily set as an error
invalid station without changing the GX Works2 setting each time.
(1) Error invalid station setting
A slave station can be set as an error invalid station in Network Configuration Setting. (
7.3)
Master station
(Station No.0)
Network configuration settings
Select "Error Invalid Station".
(2) Temporary error invalid station
This function is useful for various operations such as replacing a slave station during data link by temporarily
setting it as an error invalid station. For details, refer to
176
Slave station Slave station
(Station No.1) (Station No.2)
Slave station
(Station No.3)
No data link error will be detected on
this station even in the case of
Error invalid station
an error or power OFF.
Page 229, Section 9.7.
Page 88, Section