Precautions: Device Set To "Device (Plc Side)"; Link Refresh Range; Changing Link Device Assignment In The "Network Configuration Settings" Window; Setting An Extended Data Register (D) Or Extended Link Register (W) As A Link Refresh Device - Mitsubishi Electric QJ71GF11-T2 User Manual

(3) Precautions
(a) Device set to "Device (PLC Side)"
Set a device range not to overlap the one used for the following:
• Refresh parameters for other network modules
• Auto refresh parameters for CC-Link master/local module
• I/O numbers used for I/O modules and intelligent function modules
• Auto refresh setting for intelligent function modules
• Auto refresh using the CPU shared memory in a multiple CPU system
(b) Link refresh range
Set only link devices used in the CPU module for link refresh range. Doing so will reduce link refresh points,
resulting in a shorter link refresh time.
(c) Changing link device assignment in the "Network Configuration Settings" window
Correct the link refresh ranges of refresh parameters.
(d) Setting an extended data register (D) or extended link register (W) as a link refresh
device
Set the link refresh range properly so that it does not cross over the boundary between the internal user device
and the extended data register (D) or extended link register (W). (
Program Fundamentals) for the CPU module used)
(4) Setting example
For setting examples, refer to
106
Page 387, CHAPTER 11.
User's Manual (Function Explanation,