Mitsubishi Electric QJ71GF11-T2 User Manual page 220

Item
Network map
Network
Status
Disconnected station
monitor area
218
Note that, in the following cases, the network map that is different from the actual system
configuration is displayed.
• Two stations are connected through a switching hub.
Branches are not displayed in the network map.
Actual system configuration
GX Works2
Master station
(Station No.0)
Network map
• Switching hubs are in cascade connection.
Only one branch is displayed.
Actual system configuration
GX Works2 Master station
(Station No.0)
Network map
Displays a disconnected station that has been set in the network configuration settings but has
not yet performed data link. However, even if a disconnected station had performed data link, it is
displayed in this area in the following cases.
• A station that was reconnected to a network after cable disconnection/insertion or power-off
and power-on of the system and remains disconnected
• A disconnected station with the station icon deleted in the network map by clicking the
button
The icon indicates a station that has not yet performed data link.
Icons other than indicate stations that had performed data link before disconnection.
Description
Switching hub
Switching hub
Intelligent device Intelligent device
station (Station No.1) station (Station No.2)
Intelligent device
station (Station No.3)
Intelligent device station
(Station No.1)
Switching hub
Intelligent device
station (Station No.4)
Disconnected station
monitor area