Settings in the local stations
Connect the engineering tool to the CPU module on the local station and set parameters. Set the station number 1 and 2 to
the same setting.
1.
Set the CPU module and add a module label of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. (Page 40 Setting in the master station)
2.
Set the RJ71GN11-T2 as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
3.
Add the module labels of the RJ71GN11-T2. The addition method of the module label is the same as that of the master
station. (Page 40 Setting in the master station)
4.
Set the items in "Required Settings" as follows. For station No.2, set "Station No." to "2".
[Navigation window] [Parameter] [Module Information] [RJ71GN11-T2] [Required Settings]
7 COMMUNICATION EXAMPLES
7.1 System Configuration Example
7
43