Chapter 4 Procedures Before Operation - Mitsubishi Electric QJ71GF11-T2 User Manual

CHAPTER 4
This chapter lists the procedures to be performed before operation of CC-Link IE Field Network.
Remark
• The programming chapter in this manual provides examples for each procedure (from "System consideration" to
"Debugging") described below. (
• When using the master/local module with a C Controller module, refer to Page 531, Appendix 7.
Check box
System consideration
Consider the system configuration and link device assignments.
Mount the master/local module to the base unit.
Perform a unit test on each module.
Connect an Ethernet cable to each module.
Perform a cable test on the master/local module.
46
PROCEDURES BEFORE OPERATION
Installation
Unit test
Wiring
Cable check
To the next page
Page 387, CHAPTER 11)
Page 48, CHAPTER 5
Page 124, Section 8.1.1
Page 63, Section 6.1
Page 64, Section 6.2
Manual for slave stations
Page 68, Section 6.3
Page 78, Section 6.4.2