Mitsubishi Electric QJ71GF11-T2 User Manual page 396

5.
Open the initial setting window for the D/A converter module and set parameters as follows.
Project window
6.
Open the auto refresh window for the D/A converter module and set parameters as follows.
Project window
7.
Write the parameters to the head module. Then reset the head module or turn off and on the power.
[Online]
In this setting example, default settings are used for the parameters other than those described. For the parameter setting,
refer to the following.
MELSEC-L CC-Link IE Field Network Head Module User's Manual
User's manual for the intelligent function module
394
[Intelligent Function Module]
[Intelligent Function Module]
[Write to PLC]
or Power OFF
[L60DA4] [Parameter]
[L60DA4] [Auto Refresh]
ON