Mitsubishi Electric QJ71GF11-T2 User Manual page 96

Item
Supplementary Setting
94
Description
(2) Loopback Function Setting
Select whether to use the loopback function. (
Section 8.7) To configure a network in ring topology, select the
checkbox.
When "Ring" is selected in [Change Transmission Path Method]
under [CC IE Field Configuration], the checkbox will be checked.
When "Line/Star" is selected, the checkbox will be unchecked.
( Page 91, Section 7.3 (1) (b))
(3) Block Data Assurance per Station
Select whether to assure data integrity on a station basis in link
refresh between the CPU module and the master/local module.
( Page 134, Section 8.1.5)
(4) Operation Setting for Returning
When using the submaster function, select the operation of the
master station after it returns from the disconnected status. This
parameter can be set only when "Sub-Master Station" has been
selected in "Station Type".
Setting range
• Loopback Function Setting:
Page 178,
Selected (Use)/not selected
(Default: Not selected)
• Block Data Assurance per
Station:
Selected (Assure Block Data)/
not selected
(Default: Selected (Assure
Block Data))
• Operation Setting for
Returning:
Return as Master Station,
Return as Sub-Master Station
(Default: Return as Master
Station)