Mitsubishi Electric QJ71GF11-T2 User Manual page 100

Item
Assign RX/RY points. (
Points can be assigned in increments of 16 (Start: 0
F
RX/RY Setting
When "Sub-Master Station" is selected in "Station Type", points can
also be assigned for the master station. (
Assign RWw/RWr points in increments of 4. (
8.1.1)
RWw/RWr Setting
When "Sub-Master Station" is selected in "Station Type", points can
also be assigned for the master station. (
Link refresh target devices in the CPU module are displayed for each
link device of the master/local module.
Refresh Device
Target devices are displayed when refresh parameters have been set.
(
Set this item to reserve the slave station or to set the slave station as
an error invalid station. (
This item cannot be set for the submaster station.
• No Setting
• Reserved Station
Reserved/Error Invalid
Station
• Invalid Station
Enter the name of a device if required.
Alias The name entered is displayed in "Network Status" of the CC-Link IE
Field diagnostics.
Comment Enter a comment if required.
98
Description
Page 124, Section 8.1.1)
).
H
Page 103, Section 7.5)
Page 176, Section 8.5)
The slave station is connected to the network.
The slave station is reserved for future expansion. By reserving a
slave station, link device assignment will not change even if the
slave station is added or the reservation is cancelled. Therefore, the
program needs not to be modified. Physical connection of the slave
station is not required.
Even if a slave station is disconnected during data link, the master
station will not detect the slave station as a faulty station.
• Points:
, End: Master Station, Local
H
Station, Intelligent
Device Station, Sub-
Master Station
Remote Device Station
Page 180, Section 8.8)
Remote I/O Station
• Device number: 0 to 3FFF
(Default: Blank)
• Points:
Master Station, Local
Page 124, Section
Station, Intelligent
Device Station, Sub-
Master Station
Page 180, Section 8.8) Remote Device Station
Remote I/O Station
• Device number: 0 to 1FFF
(Default: Blank)
• No Setting
• Reserved Station
• Invalid Station
(Default: No Setting)
Up to 8 characters
(Default: Blank)
Up to 32 characters
(Default: Blank)
Setting range
Setting
Station Type
range
16 to 2048
16 to 128
16 to 64
H
Setting
Station Type
range
4 to 1024
4 to 64
Cannot be
set.
H
