Mitsubishi Electric QJ71GF11-T2 User Manual page 501

Number Name
Temporary error invalid
SW0055 station setting cancel
result
Result of reserved
SW0056
station function disable
Result of reserved
SW0057
station function enable
Number of total slave
SW0058
stations (setting)
Number of total slave
SW0059
stations (current value)
Maximum baton pass
SW005A
station
Maximum cyclic
SW005B
transmission station
Forced master switch
SW005C
command result
Maximum link scan
SW0060
time
SW0061 Minimum link scan time
Description
Stores the results when canceling the temporary error invalid station
setting.
0: Normal
1 or higher: Abnormal ( Page 439, Section 12.5)
When Temporary error invalid setting cancel request (SB0011) is turned
off, the stored error definition is cleared.
Stores the result when disabling reserved station function.
0: Normal
1 or higher: Abnormal ( Page 439, Section 12.5)
When Reserved station function disable request (SB0012) is turned off,
the stored error definition is cleared.
Stores the result when reserved station function disable is undone
0: Normal
1 or higher: Abnormal ( Page 439, Section 12.5)
When Reserved station specification enable request (SB0013) is turned
off, the stored error definition is cleared.
Stores the number of total slave stations that are set by the parameters.
Range: 1 to 120
Stores the number of total slave stations that are actually connected by
data link in CC-Link IE Field Network.
Range: 1 to 120 (0 when own station is disconnected)
Stores the maximum station No. of the stations where the baton pass is
performed.
Range: 1 to 120 (0 when own station is disconnected)
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
Stores the maximum station No. of the station where the cyclic
transmission is performed.
Range: 1 to 120 (0 when own station is disconnected)
(Condition)
• This is enabled when Data link status (own station) (SB0049) is off.
Stores the execution result of Forced master switch command (SB0019).
0: Normal
1 or higher: Error ( Page 439, Section 12.5)
Stores the maximum value of the link scan time during cyclic
transmission. (Unit: ms)
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
Stores the minimum value of the link scan time during cyclic
transmission. (Unit: ms)
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
APPENDICES
Availability
Master
station Local
(submaster station
station)
(Master
×
operating
station only)
(Master
×
operating
station only)
(Master
×
operating
station only)
×
(Submaster
station only)
499
A