Setting In The Normal Stations - Mitsubishi Electric MELSEC iQ-R RJ71LP21-25 User Manual

Setting in the normal stations

Connect the engineering tool to the CPU module on the normal station and set the parameters.
1.
Set the CPU module and add a module label of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the control station. (Page 31 Setting in the control station)
2.
Set the RJ71LP21-25 as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
3.
Add the module labels of the RJ71LP21-25. The addition method of the module label is the same as that of the control
station. (Page 31 Setting in the control station)
4.
Set the items in "Required Settings" as follows and click the [Apply] button.
[Navigation window]  [Parameter]  [Module Information]  [RJ71LP21-25]  [Required Settings]
7 COMMUNICATION EXAMPLES
34
7.1 Cyclic Transmission Program