Mitsubishi Electric QJ71GF11-T2 User Manual page 209

Item
Display of network map and error status
Display of disconnected cable and
1
disconnected station
Display of selected station status and
error details
2
Slave station number setting
Communication Test
IP Communication Test
Cable Test
3
Link Start/Stop
Network Event History
Reserved Station Function Enable
4
Enable/Disable Ignore Station Errors
System Monitor
5
Remote Operation
*1 When the own station operates as a submaster operating station, the function cannot be executed.
CHAPTER 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
: Diagnosed
GX Works2 is connected to:
Master
station or Local
submaster station
station
*1
×
*1
*1
*1
: Diagnosed with restrictions ×: Not diagnosed
Restrictions

This item is not displayed
Page 214, Section 9.3
when the selected
module does not support
"Selected Station
Communication Status
Monitor" of GX Works2.
Page 79, Section 6.4.3

Page 156, Section
8.3.3
Page 78, Section 6.4.2
To start/stop data link of
another station, GX
Works2 must be
connected to the master
Page 221, Section 9.4
station (or the master
operating station when
the submaster function is
used).
Events that can be
collected depend on the Page 223, Section 9.5
station type.
When GX Works2 is
connected to a local
station, reserved stations Page 225, Section 9.6
are only displayed
(cannot be set).
When GX Works2 is
connected to a local
station, temporary error
Page 229, Section 9.7
invalid stations are only
displayed (cannot be
set).
A remote device station
Page 426, Section 12.2
cannot be monitored.

Page 234, Section 9.8
9
Reference

207