Table of Contents
Advertisement
• When failed
Sequence scan
Start contact
Completion device
Own station CPU
(Device specified in (D2))
Completion status indication
device (Device of (D2)+1)
Completion status
(Device of (S)+0)
Master/local module
(3) Checking error details
If the dedicated instruction fails, error details can be checked by either of the following methods:
(a) In GX Works2
Error details can be checked using the CC-Link IE Field Network diagnostics. (
(b) Using devices
Completion status indication device ((D2)+1) turns on, and an error code is stored in Completion status ((S)+0)
of the control data.
According to the error code, check the error details and take a corrective action. (
12.5)
(4) When accessing CC-Link IE Field Network compliant devices
For details on access codes/attribute codes, error codes, and the processing time of the target station, refer to the
manual for the target station.
348
RIRD
0
END
0
Send buffer
Receive buffer
Target
station error
END
0
END
0
END
1 scan
Error code
Page 206, CHAPTER 9)
Page 439, Section
0
END
Advertisement
Table of Contents
Troubleshooting
