Example Of Communications Using The Ip Packet Transfer Function; When The Request Source Device And Request Destination Device Have The Same Network Address; Setting In The Cpu Module 1 And Master Station (Station Number 0) - Mitsubishi Electric QJ71GF11-T2 User Manual

8.3.7
Example of communications using the IP packet transfer
function
(1) When the request source device and request destination device have the same
network address
The following system configuration is used to explain an example of communications.
Ethernet device
(request source device)
192.168.1.1
(a) Setting in the CPU module 1 and master station (station number 0)
1.
Set the IP address in the CPU module 1.
Project window
162
CPU module 1: 192.168.1.10
Master station : 192.168.2.125
(station No.0)
Network No.1
: Route through which IP packets are passed (Routing parameters must be set.)
[Parameter]
CPU module 2: 192.168.10.10
Local station : 192.168.2.2
(station No.2)
Network No.2
Network No.10
[PLC Parameter] "Built-in Ethernet Port Setting"
Ethernet device
(request destination device)
192.168.10.1