Settings in the local stations
Connect the engineering tool to the FX5 CPU module on the local station and set parameters. Set the same setting for station
No.1 and station No.2.
1.
Set the FX5 CPU module and add the module labels of the FX5 CPU module. The setting method of the FX5 CPU
module and addition method of the module label are the same as those of the master station. ( Page 128 Setting in
the master station)
2.
Set the FX5-CCLGN-MS as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
3.
Add the module labels of the FX5-CCLGN-MS. The addition method of the module label is the same as that of the
master station. ( Page 128 Setting in the master station)
9 PROGRAMMING
116
9.2 Communication Example between the Master Station and Local station