Table of Contents
Advertisement
• When failed
Sequence scan
Write command
Write completion device
(Device specified in (D))
Write completion device
(Device of (D)+1)
Own station CPU
Setting data
(Information specified in
(n3), (n4), (n5))
Write data storage device
(Device specified in (S))
REMFR/REMTO instruction
execution status
(SW0080 to SW009F)
Master/local module
(3) Checking error details
If the dedicated instruction fails, error details can be checked by either of the following methods:
(a) In GX Works2
Error details can be checked using the CC-Link IE Field Network diagnostics. (
(b) Using devices
Completion status indication device ((D)+1) is turned on, and an error code is stored in execution status
(REMFR/REMTO) (SW0080 to SW009F).
According to the error code, check the error details and take a corrective action.
(
Page 439, Section 12.5)
REMTO
0
END
0
Channel 1
Error
CHAPTER 10 DEDICATED INSTRUCTIONS
END
0
END
0
END
1 scan
Error code
Page 206, CHAPTER 9)
10
0
END
341
Advertisement
Table of Contents
Troubleshooting
