Remark
The reserved station setting can also be temporarily disabled/enabled using link special relays (SBs) and link special
registers (SWs) of the master station. (
(b) Setting a station as a reserved station again
228
Page 408, Section 11.4)
1.
Open the "Reserved Station Function Enable"
window in the same way as described in (2) (a).
2.
In "Reserved Station List", click the number of the
target station. The text turns red and the
background turns light blue.
:
Ex.
Only stations not specified as a reserved station can be
selected. The background of available modules is
orange.
3.
Click the
button.