Mitsubishi Electric QJ71GF11-T2 User Manual page 494

Number Name
PORT2 error frame
SB015F reception detection
status (station No.0) (1)
Parameter error status
SB0170
(each station)
Parameter error status
SB017F
(station No.0)
Reserved station
SB0180
function disable status
492
Stores if a receive frame error line status caution level has occurred in
the PORT2 of station number 0 from power-on until the present.
OFF: A receive frame error line status caution level has not yet been
occurred.
ON: A receive frame error line status caution level has been occurred
at least once.
(Condition)
• This is enabled when the submaster function is used.
Stores the parameter status for each station.
OFF: No parameter errors for any stations
ON: Parameter error detected at one or more stations
If a parameter error occurs, the status of each station can be checked by
Parameter error status (each station) (SW0170 to SW0177).
Depending on the timing of the link refresh, the update of Parameter
error status (each station) (SW0170 to SW0177) may be offset by one
sequence scan.
(Conditions)
• This is enabled when Baton pass status (own station) (SB0047) is off.
• Reserved stations and stations higher than the maximum station No.
are ignored.
Stores the parameter status of the station number 0.
OFF: No parameter errors for any stations
ON: Parameter error detected at one or more stations
(Conditions)
• This is enabled when Baton pass status (own station) (SB0047) is off.
• This is enabled when the submaster function is used.
This stores if a reserved station function is disabled.
OFF: No disabled reserved station function
ON: Disabled reserved station function found
If a reserved station function is disabled, the status of each station can
be checked by Reserved station cancel setting status (SW0180 to
SW0187).
Depending on the timing of the link refresh, the update of Reserved
station cancel setting status (SW0180 to SW0187) may be offset by one
sequence scan.
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
Description
Availability
Master
station Local
(submaster station
station)