Mitsubishi Electric QJ71GF11-T2 User Manual page 217

Item
button
St. Info
Total Slave Stations
(Set In Parameter)
Total Slave Stations
(Connected)
Network
Status
Current Link Scan
Time
Number of Station
Errors Detected
Displays the meaning of icons displayed in the "CC IE Field Diagnostics" window.
The display name of the slave station can be selected from "By Device Name" and "By Station
Type". When "By Device Name" is selected, the information entered in the device name of the
network configuration settings is displayed.
Note the following points for the display in "By Device Name".
• When the name of a device is not entered in the network configuration setting, the station type
is displayed.
• When "Operate with Parameter of Host Station" is set in the network settings of the project for
the submaster station and the submaster station starts to operate as a master operating
station, the name entered in the network configuration setting of the submaster station is
displayed. (When the name of a device is not entered, the station type is displayed.)
• When "Operate with Parameter of Master Station" is set in the network settings of the project
for the submaster station and the submaster station starts to operate as a master operating
station, the station type is displayed.
Displays the total number of slave stations set by parameter.
Displays the total number of slave stations during data link on CC-Link IE Field Network.
Displays the link scan time of the displayed network.
Displays the number of error stations in the displayed network.
CHAPTER 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
Description
9
215