Equal Assignment And Identical Point Assignment Of Link Points - Mitsubishi Electric QJ71GF11-T2 User Manual

(d) Equal assignment and identical point assignment of link points
[CC IE Field Configuration]
Item
Equal Assignment
Identical Point Assignment
(e) Parameter processing of a slave station
Select the module in the station list area.
of Slave Station]
The parameters of a slave station can be set or read. This can be performed when the slave station supports
the parameter process.
The setting range varies depending on the target module. For details, refer to the manual for the slave station
used.
[Equal Assignment] or [Identical Point Assignment]
Description
Equally assign link devices to stations with preset conditions.
Item
Enter the start station number of stations for which link
Start Station
devices are equally assigned.
Enter the end station number of stations for which link
End Station
devices are equally assigned.
Enter the start number of link devices to be equally
Start No.
assigned.
Total Points Enter the total points of link devices to be equally
Assigned assigned.
Assign the same link device points to all stations.
Points entered in this field will be reflected to the "Points" of "RX/RY
Setting".
Half of the points entered in this field will be reflected to the "Points"
of "RWw/RWr Setting".
Description
[CC IE Field Configuration]
CHAPTER 7 PARAMETER SETTING
Setting range
• Start Station: 0 to the end
station number
• End Station: Number set to
"Start Station" to the end station
number
• Start No.: Same values set in
"RX/RY Setting" and "RWw/
RWr Setting"
• Total Points Assigned: Same
values set in "RX/RY Setting"
and "RWw/RWr Setting"
(Default: Blank)

[Parameter Processing
7
95