Install An Smod - Oracle X7-8 Service Manual

4. To remove the SMOD, hold the SMOD by its sides and slide it out of the server.
The SMOD is heavy. Be prepared to hold it firmly when it is clear of the slot.
Caution -
Related Information
"Install an SMOD" on page 201
■

Install an SMOD

Perform this procedure after servicing internal SMOD components, such as the HBA card,
ESM, internal USB ports, or system battery.
For component serviceability, locations, and designations, see
Components" on page
Prepare the server for cold service.
1.
This is a cold-service component. Power down the system and disconnect the AC power cables
from the server before performing this procedure.
22.
Install an SMOD
"Replaceable
Servicing Components 201