Install The Smod - Oracle SUN X4-8 Service Manual

b. To disengage the SMOD from the server midplane, simultaneously, rotate
both handles downward to their fully-open position.
This action disengages the connectors on the SMOD from the connectors on the server
midplane.
Physical harm or component damage. Do not use the SMOD handles to remove the
Caution -
SMOD from the server.
4. To remove the SMOD, grab it by its sides and slide it out the server.
"Install the SMOD" on page 197
Next Steps ■

Install the SMOD

This is a cold-service component. Disconnect the AC power cables from the server before
performing this procedure.
Install the SMOD
Servicing Components 197