Turn On The Locator Indicator Remotely (Oracle Ilom Cli) - Oracle Sun Server X4-4 Service Manual

"Turn On the Locator Indicator Remotely (Oracle ILOM CLI)" on page 105
■
"Turn On the Locator Indicator Remotely (Oracle ILOM Web Interface)" on page 106
■
"Manage the Locator Indicator Locally" on page 106
■
Turn On the Locator Indicator Remotely (Oracle
ILOM CLI)
Before going to the server, activate the server Locator indicator. This allows you to identify the
correct server within the rack.
1. Open an SSH session and at the command line log in to the SP Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example:
ipadress
ssh root@
where ipadress is the IP address of the server moudle SP.
For more information, see
The Oracle ILOM CLI prompt appears:
->
2. To turn on the Locator indicator, type the following command at the prompt:
set /System/ locator_indicator=on
To turn off the Locator indicator, type:
Note -
To verify the status of the Locator indicator, type:
3.
–>
show /System/ locator_indicator
The output of the command appears:
/System
Properties:
locator_indicator = Off
The value locator_indicator shows the status as either On or Off.
"Performing Electrostatic Discharge and Static Prevention Measures" on page 74
■
Next Steps
Oracle Integrated Lights Out Manager 3.2 Documentation Library at:
■
com/goto/ILOM/docs

Turn On the Locator Indicator Remotely (Oracle ILOM CLI)

Oracle X4 Series Servers Administration Guide
set /System/ locator_indicator=off
.
http://www.oracle.
Preparing to Service the Server 105