Creating An Appletalk Static Route - Avaya 580 User Manual

Chapter 19

Creating an AppleTalk Static Route

Web Agent
Procedure
19-10
You can create an AppleTalk static route using the Web Agent or the CLI.
To create an AppleTalk static route using the Web Agent:
1. In the navigation pane, expand the Routing > AppleTalk >
Configuration folders, and then click Static Route.
The AppleTalk Static Route Web page is displayed in the content pane.
See Figure 19-6.
Figure 19-6. AppleTalk Static Route Web Page
2. Select CREATE to add a new static route. The Add AppleTalk Static
Route Web page is displayed. See
Figure 19-7. Add AppleTalk Static Route Web Page
3. See Table 19-2 to configure the Add AppleTalk Static Route Web page
parameters.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Figure 19-7.