Chapter 2
Avaya C460 CLI Commands
routing table.
The syntax for this command is:
show ip route
Router-1> show ip route
Network
----------------
149.49.77.0
0.0.0.0
show ip route best-match
User level: read-only, read-write, admin.
Use the show ip route best-match command to display a routing table for a
destination address.
The syntax for this command is:
show ip route best-match <dst addr>
dst addr
Example:
Router-1> show ip route best-match 199.93.0.0
Searching for: 199.93.0.0
Showing 1 rows
Network
--------------- ------------------------------------------------
199.93.0.0
show ip route static
User level: read-write, admin.
Use the show ip static route command to display the static routes.
The syntax for this command is:
show ip route static [<ip addr> [<mask>] ]
ip-address
mask
164
Mask
----------------
255.255.255.0
0.0.0.0
IP address
Mask
Interface
255.255.0.0
e-135new
The IP address of the routes
The ip mask of the routes.
Next-Hop
Interface
----------------
-----------
149.49.77.70
149.49.77.1
Next-Hop
Cost TTL
135.64.76.1
Avaya C460 Reference Guide
Source
------
inband
LOCAL
inband
STATIC
Source
-----
1
n/a
STAT-HI