Chapter 10
Viewing RIP
Statistics Using
the CLI
NBMA IP Interfaces
Overview
CAUTION
10-12
Table 10-4. RIP Statistical Parameters
Parameter
Bad Packets
Received
Bad Routes
Received
To view RIP statistics using the CLI, enter the following command
from Configure mode:
> (configure)# show ip rip statistics
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Non-broadcast multi-access (NBMA) functionality was added to RIP
and OSPF routing protocols on the Avaya Multiservice switch
software. Support for this functionality was added to enable route
exchange over nonbridged connections (routed PVCs).For more
information about NBMA, refer to the "NBMA IP Interfaces" in
Chapter 11,
"Configuring the OSPF Routing
The 5.3.1 NBMA feature is not backward compatible. If you have
NBMA interfaces set up and need to downgrade from v5.3.1 to a 5.2
version of software, contact technical support.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide,v5.3.1
Defines the...
Number of bad packets received on this interface.
Number of bad routes received on this interface.
Protocol".
2 of 2