Display L2-Multicast Ip - HP 5900 Series Command Reference Manual

Received IGMPv2 reports:
Received IGMP leaves:
Received IGMPv2 specific queries:
Sent IGMPv2 specific queries:
Received IGMPv3 reports:
Received IGMPv3 reports with right and wrong records:
Received IGMPv3 specific queries:
Received IGMPv3 specific sg queries:
Sent IGMPv3 specific queries:
Sent IGMPv3 specific sg queries:
Received PIMv2 hello:
Received error IGMP messages:
Table 6 Command output
Field
general queries
specific queries
reports
leaves
reports with right and wrong records
specific sg queries
PIMv2 hello
error IGMP messages
Related commands
reset igmp-snooping statistics

display l2-multicast ip

Use display l2-multicast ip to display information about Layer 2 IP multicast groups.
Syntax
display l2-multicast ip [ group group-address | source source-address ] * [ vlan vlan-id ] [ slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group group-address: Specifies a multicast group by its IP address. If you do not specify a multicast group,
the command displays information about all Layer 2 IP multicast groups.
19
0
0
0
1
0
0
0
0
0
19
Description
Number of IGMP general queries.
Number of IGMP group-specific queries.
Number of IGMP reports.
Number of IGMP leave messages.
Number of IGMP reports with correct and incorrect records.
Number of IGMP group-and-source-specific queries.
Number of PIMv2 hello messages.
Number of IGMP messages with errors.
8
0