Allowing The Establishment Of An Indirect Ebgp Connection; Configuring A Description For An Ipv6 Peer Or Peer Group; Disabling Session Establishment To An Ipv6 Peer Or Peer Group - HP 3600 v2 series Configuration Manual

Hide thumbs Also See for 3600 v2 series:
Table of Contents

Advertisement

NOTE:
To establish a BGP connection, specify on the local router the source interface for establishing the TCP
connection to the peer on the peering BGP router. Otherwise, the local BGP router may fail to establish
TCP connection to the peer when using the outbound interface of the best route as the source interface.

Allowing the establishment of an indirect eBGP connection

Follow these steps to allow the establishment of eBGP connection to an indirectly connected peer or peer
group:
To do...
Enter system view
Enter BGP view
Enter IPv6 address family view
Allow the establishment of eBGP connection to
an indirectly connected peer or peer group
NOTE:
Direct links must be available between eBGP peers. If not, you can use the peer ebgp-max-hop command
to establish a multi-hop TCP connection in between. However, do not use this command for direct eBGP
connections with loopback interfaces.

Configuring a description for an IPv6 peer or peer group

Follow these steps to configure description for an IPv6 peer or peer group:
To do...
Enter system view
Enter BGP view
Enter IPv6 address family view
Configure a description for an IPv6
peer or peer group
NOTE:
The peer group to be configured with a description must have been created.

Disabling session establishment to an IPv6 peer or peer group

Follow these steps to disable session establishment to a peer or peer group:
To do...
Enter system view
Enter BGP view
Use the command...
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name |
ipv6-address } ebgp-max-hop
[ hop-count ]
Use the command...
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name | ipv6-address }
description description-text
Use the command...
system-view
bgp as-number
331
Remarks
Required
Not configured by
default.
Remarks
Optional
Not configured by default.
Remarks

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents