Step
2.
Configure
source address of
echo packets.
3.
Configure BFD echo
mode for an IPv6
static route.
Displaying and maintaining IPv6 static routes
Execute display commands in any view.
Task
Display IPv6 static route information.
Display
IPv6
information.
Display IPv6 static routing table information.
IPv6 static routing configuration examples
Basic IPv6 static route configuration example
Network requirements
As shown in
Command
the
bfd echo-source-ipv6 ipv6-address
ipv6
s-vpn-instance-name
prefix-length interface-type interface-number
next-hop-address
[ bfd-source ipv6-address ] [ preference
preference ] [ tag tag-value ] [ description
text ]
static
route
next
Figure
86, configure IPv6 static routes so that hosts can reach one another.
route-static
[
vpn-instance
]
ipv6-address
bfd
echo-packet
Command
display ipv6 routing-table protocol static [ inactive |
verbose ]
hop
display ipv6 route-static nib [ nib-id ] [ verbose ]
display ipv6 route-static routing-table [ vpn-instance
vpn-instance-name ] [ ipv6-address prefix-length ]
369
Remarks
By default, the source address
of
echo
packets
is
configured.
The source address of echo
packets must be a global
unicast address.
For more information about
this
command,
see
Availability
Command
Reference.
By default, BFD echo mode for
an IPv6 static route is not
configured.
The next hop IPv6 address
must be a global unicast
address.
not
High