Ipv6 Pim Snooping Configuration Commands; Display Pim-Snooping Ipv6 Neighbor - HP 3600 v2 Series Command Reference Manual

IPv6 PIM snooping configuration commands

display pim-snooping ipv6 neighbor

Syntax
display pim-snooping ipv6 neighbor [ vlan vlan-id ] [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vlan vlan-id: Displays the IPv6 PIM snooping neighbor information of the specified VLAN. The vlan-id
argument is in the range of 1 to 4094. If no VLAN is specified, this command displays the IPv6 PIM
snooping neighbor information in all VLANs.
slot slot-number: Displays the IPv6 PIM snooping neighbor information on the specified IRF member
switch. The slot-number argument specifies the ID of an IRF member switch. The value range for the
argument depends on the number of member switches and their member IDs in the IRF fabric. If no IRF
fabric exists, the slot-number argument is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim-snooping ipv6 neighbor to display IPv6 PIM snooping neighbor information.
Examples
# Display the IPv6 PIM snooping neighbor information of VLAN 2.
<Sysname> display pim-snooping ipv6 neighbor vlan 2
Total number of neighbors: 2
VLAN ID: 2
Total number of neighbors: 2
Neighbor
FE80::6401:101
FE80::C801:101
Port
Eth1/0/1
Eth1/0/2
288
Expires Option Flags
02:02:23 LAN Prune Delay(T)
03:00:05 LAN Prune Delay