IPv6 static routing commands
delete ipv6 static-routes all
Use delete ipv6 static-routes all to delete all IPv6 static routes.
Syntax
delete ipv6 [ vpn-instance vpn-instance-name ] static-routes all
Views
System view
Default level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command deletes all IPv6 static routes for the public
network.
Usage guidelines
When you use this command, the system will prompt you to confirm the operation before deleting all the
IPv6 static routes.
Examples
# Delete all IPv6 static routes.
<Sysname> system-view
[Sysname] delete ipv6 static-routes all
Delete all IPv6 static routes. Continue?[Y/N]y
Related commands
ipv6 route-static
ipv6 route-static
Use ipv6 route-static to configure an IPv6 static route.
Use undo ipv6 route-static to remove an IPv6 static route.
Syntax
ipv6 route-static ipv6-address prefix-length { interface-type interface-number [ next-hop-address ] [ bfd
{ control-packet | echo-packet } | permanent ] | next-hop-address [ bfd control-packet bfd-source
ip-address | permanent ] | vpn-instance d-vpn-instance-name next-hop-address [ bfd control-packet
bfd-source ip-address | permanent ] } [ preference preference-value ] [ tag tag-value ] [ description
description-text ]
undo ipv6 route-static ipv6-address prefix-length [ interface-type interface-number [ next-hop-address ] |
next-hop-address | vpn-instance d-vpn-instance-name next-hop-address ] [ preference preference-value ]
327