Snmp-Agent Trap Enable - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Make sure the SNMP agent uses the same UDP port for SNMP notifications as the target host. Typically,
NMSs, for example, IMC and MIB Browser, use port 162 for SNMP notifications as defined in the SNMP
protocols.
If none of the keywords v1, v2c, or v3 is specified, SNMPv1 is used. Make sure the SNMP agent uses the
same SNMP version as the target host so the host can receive the notification.
If neither authentication nor privacy is specified, the security model is no authentication, no privacy.
Examples
# Configure the SNMP agent to send SNMPv3 traps to 10.1.1.1 in the user public.
<Sysname> system-view
[Sysname] snmp-agent trap enable standard
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname
public v3
Related commands
snmp-agent source

snmp-agent trap enable

snmp-agent trap life
snmp-agent trap enable
Use snmp-agent trap enable to enable SNMP notifications globally.
Use undo snmp-agent trap enable to disable SNMP notifications globally.
Syntax
snmp-agent trap enable [ configuration | protocol | standard [ authentication | coldstart | linkdown |
linkup | warmstart ] * | system ]
undo snmp-agent trap enable [ configuration | protocol | standard [ authentication | coldstart |
linkdown | linkup | warmstart ] * | system ]
Default
SNMP configuration notifications, standard notifications, and system notifications are enabled. Whether
or not other SNMP notifications are enabled varies by modules.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
configuration: Specifies configuration notifications. If configuration notifications are enabled, the system
checks the running configuration and the startup configuration every 10 minutes for any change and
generates a notification for the most recent change.
protocol: Specifies a module for enabling SNMP notifications. For more information about this argument,
see the command reference for each module.
standard: Specifies SNMP standard notifications.
148

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents