Displaying and maintaining MCE
Execute display commands in any view.
Task
Display VPN instance information.
For commands that display routing tables for VPN instances, see Layer 3—IP Routing Command
Reference.
MCE configuration examples
Configuring the MCE that uses OSPF to advertise VPN
routes to the PE
Network requirements
As shown in
VPNs and to advertise the VPN routes to PE 1 through OSPF.
Figure 4 Network diagram
Configuration procedure
Assume that the system name of the MCE device is MCE, the system names of the edge devices of
VPN 1 and VPN 2 are VR 1 and VR 2, respectively, and the system name of PE 1 is PE1.
1.
Configure the VPN instances on the MCE and PE 1:
Figure
4, VPN 2 runs OSPF. Configure the MCE device to separate routes from different
Command
display ip vpn-instance [ instance-name vpn-instance-name ]
14