Multicast; Ospf - HP J9575A Manual

Syslog via TCP
Enhancement (PR_0000058564)—Adds the ability to send syslog messages via TCP. For more information, see
■
"Debug/Syslog Operation" in the "Troubleshooting" appendix of the Management and Configuration Guide for your
switch.
Set sFlow Agent Address
Enhancement (PR_0000073083, CR_0000077874)—This feature adds sflow as an option to the existing ip source-
■
interface command, which provides the ability to specify the sFlow source agent address that is included in the packets
sent from the switch to the sFlow collection nodes.

Multicast

Support for Additional RPs and Multicast Groups
Enhancement (PR_0000070869)—The administrator is now able to configure 8 static Rendezvous Points (RPs)
■
and 8 multicast group ranges per static RP in PIM-SM mode. For more information, see the "PIM-SM" chapter in the
Multicast and Routing Guide for your switch.
MLDv2
■ Enhancement (PR_0000071588)—IGMP v3 and MLD v2 capabilities were added to the switch. For more
information, see the "Multicast Listener Discovery (MLDv1 and MLDv2)" chapter in the IPv6 Configuration Guide
for your switch.
Override Reverse Path Forward (RPF) Lookup
■ Enhancement (PR_0000066432)—Adds the ability to override the normal Reverse Path Forward (RPF) lookup
mechanism so the router can accept multicast traffic on an interface other than that which would be normally selected.
See "PIM-SM (Sparse Mode)" in the Multicast and Routing Guide.
PIM CLI enhancements
Enhancement (PR_0000068123)—Enhanced the router pim command. For more information, see the "PIM-DM
■
(Dense Mode)" and "PIM-SM (Sparse Mode)" chapters in the Multicast and Routing Guide for your switch.

OSPF

OSPF Neighbor Shutdown Notification
Enhancement (PR_0000065022)—Provides a way to gracefully shut down OSPF routing on HP switches without
■
losing packets that are in transit. For more information, see the chapter "IP Routing Features" in the Multicast and
Routing Guide for your switch.
Define Cost of LSA Type 3 Summarized Prefix
Enhancement (PR_0000065218) —Provides a way to define a fixed, user-assigned cost of an OSPF LSA type 3
■
summarized prefix. For more information, see the section "Configuring OSPFv3 on the Routing Switch" in the IPv6
Configuration Guide for your switch.
OSPF LSA Type 3 Summarized Prefix Cost
■ Enhancement (PR_0000071947)—Define OSPF LSA Type 3 Summarized Prefix Cost for OSPF v3. For more
information, see the "Introduction to OSPFv3" chapter in the IPv6 Configuration Guide for your switch.
8