Mce Configuration Examples; Configuring The Mce That Uses Ospf To Advertise Vpn Routes To The Pe - HP FlexFabric 5700 Configuration Manual

Task
Display information about a specified or
all VPN instances.
Display BGP peer group information for
a VPN instance.
Display BGP peer information for a VPN
instance.
For other MCE related displaying and maintaining commands, such as displaying routing table
information for a VPN instance and maintaining routing sessions for a VPN instance, see Layer
3—IP Routing Command Reference.
For more information about the display bgp group and display bgp peer commands, see Layer
3—IP Routing Command Reference.

MCE configuration examples

Configuring the MCE that uses OSPF to advertise VPN
routes to the PE
Network requirements
As shown in
VPNs and to advertise the VPN routes to PE 1 through OSPF.
Figure 4, VPN 2 runs OSPF. Configure the MCE device to separate routes from different
Command
display ip vpn-instance [ instance-name vpn-instance-name ]
display bgp group ipv4 [ unicast ] vpn-instance
vpn-instance-name [ group-name group-name ]
display bgp peer ipv4 [ unicast ] vpn-instance
vpn-instance-name [ ip-address mask-length | { ip-address |
group-name group-name } log-info | [ [ ip-address ] verbose ]
[ standby slot slot-number ] ]
15