Specifying An As Number And A Router Id For Bgp Ls Messages; Displaying And Maintaining Bgp; Displaying Bgp - HP FlexFabric 12900E Series Configuration Manual
Hide thumbs
Also See for FlexFabric 12900E Series:
- Installation manual (152 pages) ,
- Command reference manual (213 pages)
Table of Contents
Advertisement
Specifying an AS number and a router ID for BGP LS
messages
Perform this task to ensure that LS messages sent by devices in the same AS have the same AS
number and router ID.
To specify an AS number and a router ID for BGP LS messages:
Step
1.
Enter system view.
2.
Enter BGP instance view.
3.
Enter BGP LS address
family view.
4.
Specify an AS number and
a router ID for BGP LS
messages.
Displaying and maintaining BGP
Displaying BGP
Execute display commands in any view (IPv4 unicast address family).
Task
Display BGP NSR status information.
Display BGP IPv4 unicast peer group
information.
Display BGP IPv4 unicast peer or peer
group information.
Display
BGP
information.
Display dampened BGP IPv4 unicast
routing information.
Display
BGP
information.
Command
system-view
bgp
instance-name
[ multi-session-thread ]
address-family link-state
domain-distinguisher
as-number:router-id
IPv4
unicast
routing
dampening
parameter
instance
as-number
[
Command
display bgp [ instance instance-name ] non-stop-routing
status
display bgp [ instance instance-name ] group ipv4 [ unicast ]
[
vpn-instance
vpn-instance-name
group-name ]
display bgp [ instance instance-name ] peer ipv4 [ unicast ]
[ vpn-instance vpn-instance-name ] [ ipv4-address mask-length
| { ipv4-address | group-name group-name } log-info |
[ ipv4-address ] verbose ]
display bgp [ instance instance-name ] routing-table ipv4
[ unicast ] [ vpn-instance vpn-instance-name ] [ ipv4-address
[ { mask-length | mask } [ longest-match ] ] | ipv4-address
[ mask-length | mask ] advertise-info | as-path-acl
as-path-acl-number
{
{
basic-community-list-number
[ whole-match ] | adv-community-list-number } | peer
ipv4-address
{
advertised-routes
[ ipv4-address [ mask-length | mask ] | statistics ] | statistics ]
display bgp [ instance instance-name ] routing-table
dampened
ipv4
vpn-instance-name ]
display bgp
[ instance instance-name ] dampening
parameter ipv4 [ unicast ] [ vpn-instance vpn-instance-name ]
296
Remarks
N/A
]
N/A
N/A
By default, the AS number and
router ID of the current BGP
process are used.
]
[
|
community-list
|
comm-list-name
|
received-routes
[
unicast
]
[
group-name
}
}
vpn-instance
Advertisement
Table of Contents
Troubleshooting
