Display Lacp System-Id - HP 12500 Series Command Reference Manual

Field
Protocol: (s) - spoofing
Interface
Link
Speed
Cause

display lacp system-id

Use display lacp system-id to display the system ID of the local system.
Syntax
display lacp system-id
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Usage guidelines
You can use the lacp system-priority command to change the LACP priority of the local system.
You specify the LACP priority value in decimal format in the lacp system-priority command, but it is
displayed as a hexadecimal value by the display lacp system-id command.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 0000-fc00-6504
Table 4 Command output
Field
Actor System ID: 0x8000, 0000-fc00-6504
Related commands
lacp system-priority
Description
If the network layer protocol state of an interface is
shown as UP, but its link is an on-demand link or not
present, its protocol attribute includes the spoofing flag
(an s in parentheses).
Abbreviated interface name.
Physical link state of the interface.
Interface speed, in bps.
Cause of a DOWN physical link.
Description
Local system ID, which comprises the system LACP priority
(0x8000 in this sample output) and the system MAC address
(0000-FC00-6504 in this sample output).
18