Display Router Id; Dscp - HP 5920 Series Command Reference Manual

Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
MD5 authentication enabled.
The last key is 3.
The rollover is in progress, 2 neighbor(s) left.
Table 49 Command output
Field
Virtual-link Neighbor-ID
Neighbor-State
Interface
Cost
State
Type
Transit Area
Timers
MD5 authentication enabled
The last key
neighbor(s)

display router id

Use display router id to display the global router ID.
Syntax
display router id
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the global router ID.
<Sysname> display router id
Configured router ID is 1.1.1.1

dscp

Use dscp to configure a DSCP value for outgoing OSPF packets.
Use undo dscp to restore the default.
Description
ID of the neighbor on the virtual link.
Neighbor state: Down, Init, 2-Way, ExStart, Exchange, Loading, Full.
IP address and name of the local interface on the virtual link.
Interface route cost.
Interface state.
Virtual link.
Transit area ID.
Values of timers: hello, dead, retransmit, and interface transmission delay.
Authentication mode.
Most recent MD5 authentication key ID.
Number of neighbors that have not completed key rollover.
136