Cylinder Head Removal - TGB BLADE 425 Service Manual

To this chapter contents
6. CYLINDER HEAD/VALVE

Cylinder Head Removal

2 nuts
Remove engine. (Refer to chapter 5)
Remove the inlet pipe (2 nuts).
Remove 1 bolt of thermostat and then remove the
thermostat. Thermostat bolts
Remove hole bolt and spring for the cam chain
tensioner.
Loosen 2 bolts, and then remove tensioner.
Remove thermostat (2 bolts).
Tensioner bolts
Spark plug
Remove spark plug.
Remove the nuts of cylinder head(4 nuts)
4 nuts
6-4