Engine Oil; Oil Change - TGB Outback 425 Owner's Manual

Table of Contents

Advertisement

16. Engine Oil

Turn off engine, and park the ATV in flat surface with
parking brake.
Check oil level with oil dipstick.
Do not screw the dipstick into engine
when checking.
If oil level is low level, fill with
recommended oil to upper level.

Oil Change

Place an oil pan under the ATV and remove oil
drain plug.
After drained, make sure washer can be re-used.
Install oil drain plug to a satisfactory torque.
Engine Oil Filter change
Drain engine oil out.
Filter
Install oil
Add oil to crankcase (oil viscosity SAE 10W-40)
Engine oil capacity: 3500c.c. when replacing
Install dipstick, start the engine for several
minutes.
Turn off engine and check oil level again.
Check for any engine oil leaks.
21
to a satisfactory torque.

Advertisement

Table of Contents
loading

Table of Contents