Installation Of Engine - TGB Hornet 50 Service Manual

4-2-2 Installation of Engine

A. Lift the body and point the bottom end hole of crank case bracket to the two front holes
of engine crank case. Install Engine Mounting Shaft and lock.
B. Install Ignition Coil , Flywheel Magneto , Engine, Earth , and Auto-Choke Cable .
C. Install Oil Hose. Release the bubble by releasing Bolt on the Oil Pump to let the oil
flow . Relock the Bolt until no bubble appears.
D. Install Carburetor negative pressure hose (I), fuel hose(2).
Make sure to lock the circlip.
42